Inch Pitch

What prop do you recommend for this setup?

I have a 1999 Johnson 225HP on a Sprint Bass boat. It is sluggish out of the hole and turn a maximum of 5200rpm. The boat lifts @4000 rpm but as you give more throttle it drops off its pad. I think my prop is oversized. What do you recommend? Any other suggestions to get maximum performance from this setup?

The boat should be turning about 5500 to 5700 RPM. The prop you have on there needs to be re-pitched by at least 1 or 2 sizes down. If it is a 21 inch pitch in it take it to a prop shop and tell them what it is turing (rpm) and ask if you should go down one pitch or two. But when it falls off the pad do you have a trim that will let you trim out your motor? A motor that size will have one, but maybe it's broken? You see I can't understand why it is falling off the pad when it is opened up. The trim could be the problem if it isn't working

I just used the 21 inch pitch as an example- no matter it's pitch it needs to be downsized because it is not allowing the motor to rev up properly and run at the proper rpm.

Find Inch Pitch On eBay Below:

Cannon 16 inch Quarter Tip carving bar KIT LG 3 8 pitch with chain and sprocket
Cannon 16 inch Quarter Tip carving bar KIT LG 3 8 pitch with chain and sprocket
$157.06
STIHL 3 8 Pitch PS RACING CHAIN 24 inch Cannon 80 drivers full chisel 050 gauge
STIHL 3 8 Pitch PS RACING CHAIN 24 inch Cannon 80 drivers full chisel 050 gauge
$25.61
STIHL 3 8 Pitch PS RACING CHAIN 24 inch Cannon 81 drivers full chisel 050 gauge
STIHL 3 8 Pitch PS RACING CHAIN 24 inch Cannon 81 drivers full chisel 050 gauge
$25.72
STIHL 3 8 Pitch PS3 Picco chain for 18 inch bar 62 drivers full chisel 50 gauge
STIHL 3 8 Pitch PS3 Picco chain for 18 inch bar 62 drivers full chisel 50 gauge
$19.50
OREGON 24 inch chainsaw bar Stihl MS262 MS660 3 8 Pitch 050 Gauge Power Match
OREGON 24 inch chainsaw bar Stihl MS262 MS660 3 8 Pitch 050 Gauge Power Match
$66.10
OREGON 24 inch chainsaw bar 3 8 Pitch 050 Gauge
OREGON 24 inch chainsaw bar 3 8 Pitch 050 Gauge
$66.10
OREGON 20 inch chainsaw bar fits Stihl MS361 MS660 3 8 Pitch 050 Gauge Pro
OREGON 20 inch chainsaw bar fits Stihl MS361 MS660 3 8 Pitch 050 Gauge Pro
$44.39
OREGON 28 inch chainsaw bar Fits Stihl MS261 MS660 3 8 Pitch 050 Gauge
OREGON 28 inch chainsaw bar Fits Stihl MS261 MS660 3 8 Pitch 050 Gauge
$69.82
50 Bars Stihl 16 inch bar for MS170 MS251 3 8 Pitch 043 Gauge 55 drivers
50 Bars Stihl 16 inch bar for MS170 MS251 3 8 Pitch 043 Gauge 55 drivers
$1,248.89
STIHL 3 8 Pitch PS RACING CHAIN 24 inch Cannon 84 drivers full chisel 050 gauge
STIHL 3 8 Pitch PS RACING CHAIN 24 inch Cannon 84 drivers full chisel 050 gauge
$26.60
Stihl 41 inch chainsaw bar for MS880 084 076 075 090 070 404 Pitch 063 Gauge
Stihl 41 inch chainsaw bar for MS880 084 076 075 090 070 404 Pitch 063 Gauge
$127.77
Stihl 36 inch chainsaw bar for MS261 MS660 3 8 Pitch 063 Gauge Yellow Label
Stihl 36 inch chainsaw bar for MS261 MS660 3 8 Pitch 063 Gauge Yellow Label
$107.77
OREGON 32 inch chainsaw bar 3 8 Pitch 050 Gauge Fits Husqvarna Jonsered Poulan
OREGON 32 inch chainsaw bar 3 8 Pitch 050 Gauge Fits Husqvarna Jonsered Poulan
$77.77
NEW Cannon SUPERBAR 32 inch chainsaw bar 3 8 Pitch 050 Gauge Medium saws
NEW Cannon SUPERBAR 32 inch chainsaw bar 3 8 Pitch 050 Gauge Medium saws
$130.50
STIHL Husky 3 8 Pitch PS3 Picco chain 18 inch 68 drivers full chisel 050 gauge
STIHL Husky 3 8 Pitch PS3 Picco chain 18 inch 68 drivers full chisel 050 gauge
$23.50
Stihl 25 inch chainsaw bar for MS261 MS660 3 8 Pitch 050 Gauge
Stihl 25 inch chainsaw bar for MS261 MS660 3 8 Pitch 050 Gauge
$83.33
Stihl 25 inch chainsaw bar for MS261 MS660 3 8 Pitch 050 Gauge Yellow Label
Stihl 25 inch chainsaw bar for MS261 MS660 3 8 Pitch 050 Gauge Yellow Label
$85.55
OREGON 18 inch chainsaw bar for Stihl MS261 MS660 3 8 Pitch 050 Gauge Pro
OREGON 18 inch chainsaw bar for Stihl MS261 MS660 3 8 Pitch 050 Gauge Pro
$38.38
STIHL 3 8 Pitch PS RACING CHAIN 20 inch Carver 71 drivers full chisel 050 gauge
STIHL 3 8 Pitch PS RACING CHAIN 20 inch Carver 71 drivers full chisel 050 gauge
$23.50
STIHL 3 8 Pitch PS3 Green CHAIN 20 inch Carver 71 drivers full chisel 050 gauge
STIHL 3 8 Pitch PS3 Green CHAIN 20 inch Carver 71 drivers full chisel 050 gauge
$23.25
NEW Cannon Superbar 60 inch chainsaw bar 404 pitch 063 gauge
NEW Cannon Superbar 60 inch chainsaw bar 404 pitch 063 gauge
$382.99
STIHL 325 Pitch Sawchain 74 drivers 050 guage chisel Saw Chain for 18 inch bar
STIHL 325 Pitch Sawchain 74 drivers 050 guage chisel Saw Chain for 18 inch bar
$21.50
STIHL 325 Pitch Sawchain 67 drivers 50 guage chisel Saw Chain for 16 inch bar
STIHL 325 Pitch Sawchain 67 drivers 50 guage chisel Saw Chain for 16 inch bar
$19.75
STIHL 325 Pitch Sawchain 81 drivers 050 guage chisel Saw Chain for 20 inch bar
STIHL 325 Pitch Sawchain 81 drivers 050 guage chisel Saw Chain for 20 inch bar
$23.50
STIHL 3 8 Pitch PS3 Picco chain 20 inch Cannon 72 drivers full chisel 50 gauge
STIHL 3 8 Pitch PS3 Picco chain 20 inch Cannon 72 drivers full chisel 50 gauge
$23.75
STIHL 3 8 Pitch PS3 Picco chain 86 drivers full chisel 050 gauge for 28 inch C
STIHL 3 8 Pitch PS3 Picco chain 86 drivers full chisel 050 gauge for 28 inch C
$25.98
STIHL 3 8 Pitch PS3 Picco chain 87 drivers full chisel 050 gauge for 28 inch L
STIHL 3 8 Pitch PS3 Picco chain 87 drivers full chisel 050 gauge for 28 inch L
$26.38
Cannon Husqvarna H1 SUPERMINI 18 inch chainsaw bar 3 8 Pitch 050 Gauge Husky
Cannon Husqvarna H1 SUPERMINI 18 inch chainsaw bar 3 8 Pitch 050 Gauge Husky
$89.42
STIHL 3 8 Pitch PS RACING CHAIN 18 inch Bar 66 drivers full chisel 050 gauge
STIHL 3 8 Pitch PS RACING CHAIN 18 inch Bar 66 drivers full chisel 050 gauge
$22.85
NEW Cannon SUPERBAR 50 inch chainsaw bar 404 Pitch 063 Gauge
NEW Cannon SUPERBAR 50 inch chainsaw bar 404 Pitch 063 Gauge
$312.00
STIHL 3 8 Pitch PSR Picco chain 86 drivers full chisel 050 gauge for 28 inch Y
STIHL 3 8 Pitch PSR Picco chain 86 drivers full chisel 050 gauge for 28 inch Y
$26.36
Stihl 32 inch chainsaw bar for MS261 MS660 3 8 Pitch 050 Gauge Yellow Label
Stihl 32 inch chainsaw bar for MS261 MS660 3 8 Pitch 050 Gauge Yellow Label
$87.77


Recently Purchased Inch Pitch:


piltz stihl ms170 timber framer 16 inch carving saw chainsaw 14 pitch, new cannon husky superbar 84 inch chainsaw bar 404 pitch 063 gauge 7 feet long, new cannon husqvarna superbar 72 inch chainsaw bar 404 pitch 063 gauge, new cannon husqvarna superbar 60 inch chainsaw bar 404 pitch 063 gauge, cannon husky h1 supermini 32 inch chainsaw bar 38 pitch 370 050 gauge, new cannon superbar husqvarna mount 50 inch chainsaw bar 404 pitch 063 gauge, 50 bars stihl 16 inch bar for ms170 ms251 38 pitch 043 gauge 55 drivers, piltz stihl ms170 12 inch carving saw chainsaw 14 pitch timber frame tool, cannon superbar 60 inch chainsaw bar 404 pitch oregon chain, stihl 38 pitch psr picco chain 91 drivers full chisel 050 gauge for 28 inch y, 38 cannon superbar 41 inch chainsaw bar 38 pitch 063 gauge large saws ms880, oregon 42 inch chainsaw bar fits stihl husqvarna h1 mount 38 pitch 063 gauge, new cannon superbar 28 inch chainsaw bar 38 pitch 063 gauge medium saws, 063 gauge cannon supermini 28 inch chainsaw bar 38 pitch 063 gauge, stihl 38 pitch ps3 green chain 20 inch carver 71 drivers full chisel 050 gauge, stihl 38 pitch ps racing chain 20 inch carver 71 drivers full chisel 050 gauge, cannon husqvarna h1 supermini 18 inch chainsaw bar 325 pitch 050 gauge husky, stihl 38 pitch ps racing chain 20 inch carver 70 drivers full chisel 050 gauge, stihl 38 pitch ps3 picco chain 20 inch cannon 70 drivers full chisel 50 gauge, 325 pitch stihl 18 inch bar only ms180 ms251 325 pitch 063 gauge, stihl 18 inch bar for ms261 ms660 38 pitch 050 gauge , cannon husqvarna h1 supermini 18 inch chainsaw bar 38 pitch 050 gauge husky, cannon 16 inch quarter tip carving bar kit sm 14 pitch with chain and sprocket, 10 bars stihl 16 inch bar for ms170 ms251 38 pitch 043 gauge 55 drivers, stihl 38 pitch psr picco chain 86 drivers full chisel 050 gauge for 28 inch y, cannon 16 inch quarter tip carving bar kit lg 38 pitch with chain and sprocket, new cannon superbar 36 inch chainsaw bar 404 pitch 063 gauge large saws, stihl 38 pitch ps racing chain 20 inch cannon 72 drivers full chisel 050 gauge, new cannon superbar plus 32 inch chainsaw bar 404 pitch 063 gauge medium saws, oregon 32 inch chainsaw bar 38 pitch 050 gauge fits husqvarna jonsered poulan, stihl 20 inch chainsaw bar for ms261 ms660 38 pitch 050 gauge , stihl 28 inch chainsaw bar for ms261 ms660 38 pitch 050 gauge yellow label, stihl 32 inch chainsaw bar for ms261 ms660 38 pitch 050 gauge yellow label, stihl 38 pitch ps racing chain 24 inch cannon 81 drivers full chisel 050 gauge, stihl 38 pitch ps racing chain 24 inch cannon 80 drivers full chisel 050 gauge, oregon 36 inch chainsaw bar fits stihl ms261 ms660 38 pitch 063 gauge, stihl 41 inch chainsaw bar for ms880 084 076 075 090 070 404 pitch 063 gauge, new cannon superbar plus 32 inch chainsaw bar 38 pitch 063 gauge medium saws, new cannon superbar plus 36 inch chainsaw bar 404 pitch 063 gauge medium saws, new cannon superbar plus 36 inch chainsaw bar 38 pitch 063 gauge medium saws, stihl 38 pitch ps racing chain 18 inch bar 66 drivers full chisel 050 gauge, stihl 38 pitch ps racing chain 16 inch bar 56 drivers full chisel 050 gauge, stihl 16 inch 38 kit for ms170 ms251 38 pitch 043 gauge 55 drivers 7 tooth, stihl 16 inch bar for ms170 ms251 38 pitch 043 gauge 55 drivers, stihl 36 inch chainsaw bar for ms880 084 076 075 090 070 38 pitch 063 gauge, medium stihl mount cannon supermini 18 inch chainsaw bar 38 pitch 050 gauge, new cannon stihl superbar 84 inch chainsaw bar 404 pitch 063 gauge 7 feet long, stihl 12 inch carving kit bar 14 pitch with chain and sprocket for ms192t 200t, oregon 42 inch chainsaw bar fits stihl ms261 ms660 38 pitch 063 gauge, new cannon superbar 41 inch chainsaw bar 38 pitch 063 gauge medium saws



Comments are closed.