91 Full

full size blazer vent window weatherstrip replacement?

I have a 91 full size blazer and I'm a bit stuck. I followed as the shop manual said on how to get the vent window out, but now its different than the book. The instructions are for a 91 full size, but my window has rivets and a spring on it. also its attatched to the window channel, which is different than the book. I know if i drill out the rivets i can re-rivet them once i put the new weatherstripping on. I need them out of the way because the weatherstripping goes around the piece that attatches the window to the door. Also, i dont kow what to do about the spring. I dont want to mess with it because i dont know if its going to be hard to get back on. Anyone have experience with this that can be a big help for me so im not out here at midnight lol.

If you are talking about the coiled spring that is on the window regulator don't worry about it just do what you need and then reinstall the regulator.....the spring wont go anywhere.

Find 91 Full On eBay Below:



Recently Purchased 91 Full:


stihl 38 pitch psr picco chain 91 drivers full chisel 050 gauge for 28 inch y, stihl 38 pitch ps3 picco chain 91 drivers full chisel 050 gauge, 063 gauge oregon 38 saw chain for 28 inch bar 91 drivers full chisel full skip, oregon 050 gauge 38 saw chain for 28 inch bar 91 drivers full chisel full skip, stihl 38 chain 91 drivers 063 gauge full chisel full skip rslfk for 28 inch bar, stihl 38 050 gauge chain for 28 inch bar 91 drivers full chisel full skip rslfk



Comments are closed.